Sign up now
to enroll in courses, follow best educators, interact with the community and track your progress.
GATE 2017 Set 2
548 plays


Lohit Kumar Yadav
IRSME. Graduated in Mechanical engineering. Secured AIR 1 in ESE 2017. Believes in Quality Education for all.

Unacademy user
sir in question 3 of dot placement answer will be a because there will be space for dot on the left site between triangle ,pentagon and square
sir so good for the gate extraordinary explanation sir
in last question it will be sin2●/2●
in last question it will be sin2●/2●
  1. GATE 2017- Set2 By: Lohit K Yadav

  2. A cantilever beam of length L and flexural modulus EI is subjected to a point load P at the free end. The elastic strain energy stored in the beam due to bending (neglecting transverse shear) a) P2L3/3EI c) PL3/3EI d) PL3/3EI

  3. L 2 2e1

  4. The heat loss from a fin is 6W. The effectiveness and efficiency of the fin are 3 and 0.75, respectively. The heat loss (in W) from the fin, keeping the entire fin surface at base temperature, is

  5. n O-S

  6. For a single server with Poisson arrival and exponential service time, the arrival rate is 12 per hour. Which one of the following service rates will provide a steady state finite queue length? a) b) c) d) 6 per hour 10 per hour 12 per hour 24 per hour

  7. The magnitude of shear force (in N) in the cross-section at x -10 mm is For a loaded cantilever beam of uniform cross-section, the bending moment (in along the length is M(x) 5x2+10x, where x is the distance (in mm) measured from the free end of the beam.

  8. (S.F.) = iioN

  9. In a slider-crank mechanism, the lengths of the crank and the connecting rod are 100mm and 16omm, respectively. The crank is rotating with an angular velocity of 10 radian/s counter- clockwise. figure is The magnitude of linear velocity (in m/s) of the piston at the instant corresponding to the configuration shown in the

  10. Thank You