pH PROBE

Introduction 

 The “pH probe” study is an important test in microbiology. In this test a thin probe is inserted into the esophagus that spreads through from the mouth to the stomach. This test helps the doctor to properly diagnose the rate of acidity in the esophagus of children. In this way “pH probe” helps the doctor to treat patients with high acid reflux. In this study, the role of Automatic Temperature Compensation or “ATC ph probe”, the role of “pH probe Thermo Scientific” is very deeply discussed. The role of the “DIY pH probe” was also elaborately discussed in the study. 

Discussion 

ATC ph probe

“ATC pH probe” popularly known as Automatic Temperature compensation is a combination of pH electrodes that come with an in-built temperature sensor. The time of “ATC ph probe” is immersed into its solution; it automatically measures the temperature then the temperature data is transferred to the pH meter. 

In order to appropriate measurement, the ph calibration simultaneously works with the pH meter. It is used with at least two pH buffers. The recognition is done by pHmeter and the pHelectrode correctly calibrates the pH buffer. “ATC ph probe” after calibration enables the pH meter to initiate slopes according to the measured temperature. In the case of Horiba pH meters after two calibration points present the reported slope. This is generally done by subtracting the actual from the total percentage and then it is divided by the Theoretical slope multiple by 100. In the “ATC pH probe,” the default temperature generally stays between 24.5 to 25 degrees Celsius. In the “ATC ph probe”, 3 in 1 ph probe also used the temperature to automatically transfer to the pH meter as a result one electron is plunged in each solution.  The Horiba pH meter has both “ATC ph probe” and MTC features. The most important factor in the “ATC ph probe” is that it always gives the correct reading of temperature. 

pH probe Thermo scientific

pH probe Thermo scientific has a variety of electrode categories.  In “pH probe Thermo scientific” these varieties of electrodes help to search specifically, which is helpful in day to day use. The basic “pH probe Thermo scientific” features are to select the right electrode to maintain compatibility. “pH probe Thermo scientific”  is used in many fields like biological and pharmaceutical use,  industrial and chemical use, petrochemical organizations and academic organizations.

In “pHprobe Thermo scientific” mentions the standard size of each electrode is 12 mm in diameter with a variety of junctions. The junctions are used to ensure the sure flow to lower maintenance. In the case of semi-micro “pH probe Thermo scientific” mentions, the electrode diameter size is between 6-8 diameter. It is made up of a glass body with chemical resistant features. It can bear high temperatures and allows samples to reach the limit of up to 200. “pH probe Thermo scientific”, mentions micro, spear, rugged bulb and flat surface tip that is used to serve different situations.  Among these, the sharp tip is used for piercing semi-solid and solid samples. In the case of a flat surface, it has come with double junctions, is refillable and requires low maintenance.

DIY pH probe

DIY pH probe has a lot of features compared to two other ph probes.  DIY pH probe has input voltage stays 3.5 to 5.5 approximately.  DIY pH probe’s hardware is filtered with output signals with low jitters.  DIY pH probe has a uniform sensor size that is easy in case of mechanical connection.

In DIY ph probe’s pH sensor used Arduino code. The whole connection system is systematic. In DIY pH probe, generally 3 pins are required to connect with Arduino. The testing results in the  DIY pH probe being uploaded on the Arduino board, later reflected on the serial monitor and enables the pH sensor. In a DIY pH probe, the pHsensor is made on analogue sensor-based requirements and here also need calibration. In the DIY pH probe, the very acidic nature is 0, 7 is neutral and 14 is very alkaline. However various buffer solutions are in the market with fixed pH.   The final result is remarkably good and can be required to use in microbiology.

Conclusion 

On a concluding note, it can be said that the “pH probe” is a very important topic in microbiology based on its applications. Among various ph probes “The ATC pH probe” is useful because of its automatic measurement of temperature and analyzes the data with the pH   meter and pH electrode. The use of theoretical slope in “ATC pHprobe” always enables it to be read correctly. “pH probe Thermo scientific” has come with a variety of electrode categories that are helpful in day to day use. “pH probe Thermo scientific” does not require any maintenance. The best part of the “DIY pH probe” is that its pH sensors can detect any solutions instantly according to its pH range. The beneficial qualities in various pH probes help modern microbiology at various levels. In modern times not only microbiology other sectors also apply pH probes to get accurate results.