Civil Engineer | M.E. Grad in Transportation Engg. | Passionate about teaching | Derive my happiness sharing knowledge and help learners

Dhananjay Pandya

Rigid pavements are rigid i.e, they do not flex much under loading like flexible pavements.
They are constructed using cement concrete. In this case, the load carrying capacity is mainly due to the
rigidity ad high modulus of elasticity of the slab (slab action). H. M. Westergaard is considered the pioneer inproviding the rational treatment of the rigid pavement analysis.

In rigid pavements, wheel loads are transferred to sub-grade soil by flexural strength of the pavement and the pavement acts like a rigid plate (e.g. cement concrete roads). In addition to these, composite pavements are also available. A thin layer of flexible pavement over rigid pavement is an ideal pavement with most desirable characteristics. However, such pavements are rarely used in new construction because of high cost and complex analysis required.

Further in this course we will see the different design philosophy, and method of pavement design, also concern on the Defect and Failure of Rigid pavement.

GATE (Graduate Aptitude Test in Engineering) 2020 & 2021 complete preparation with best educators. Know about the detailed syllabus, best books, exam pattern and dates, previous year question papers a

GATE & ESE

Hindi

(Hindi) Rigid Pavement Design : GATE (CE)

Highway Engineering

Transportation Engineering

Civil Engineering

GATE & ESE - Civil

GATE, ESE and IIT-JAM

Ace the toughest competitive and government exams in India 

Test Preparation

Introduction

Course Overview (in Hindi)

Introduction to Rigid Pavements (in Hindi)

Concrete pavement analysis by Winkler's/ Spring foundation - Mechanical model
and basic concept of Modulus of subgrade reaction and Radius of relative stiffness.

Concrete Pavement- Mechanical Model (in Hindi)

Design parameters of Rigid Pavement.
# Modulus of Subgrade Reaction
# Radius of resisting Section
# Radius of relative Stiffness

Rigid Pavement - Design Parameters (in Hindi)

# Critical Position of Stress Analysis
# Stress in Rigid Placement
1) Load Stress
2) Warping Stress

Stress in Rigid Pavement (in Hindi)

Friction Stress Analysis - Derivation | Cases | Worst combination of stresses

Frictional Stress in Concrete Pavent (in Hindi)

Fully explained - Step by Step numerical based on Stress Calculation and Worst combination of stress.
* With 2 critical cases
(Probability of Cases may asked in GATE - 2019)

Numerical - Stress determination (in Hindi)

Joints in Detail
# Basic Definations of Type of joint with their functions.
# Description of Dowel Bar & Tie Bar with diagram

Joints Introduction- Tranverse & Longitudinal Joint (in Hindi)

Transverse Joint- Expansion Joint | Numerical

Joint- Transverse joint (Expansion joint) (In Hindi)

Transverse joints.
#When PCC slab is used 
#when dowel bar are used.
#Numerical

Joints- Transverse joint (Contraction joint) (in Hindi)

Joints- Longitudnal joint (in Hindi)

#Top & VERIFIED EDUCATOR
# PLUS EDUCATOR
Referral Code:-  CIVILGURU (Maximum discount)

Praveen Kumar

In this course educator is going to discuss the question which asked frequently in many examination also practice the other expected important question for Transportation Engineering for GATE

(Hindi) Transportation Engineering for GATE

B.Tech Civil engineering, MNE at chegg India private limited qualified GATE and SSC JE

Mohammed Raza Sohail

In this course, Mohammed Raza Sohail discusses Traffic Engineering for GATE (CE). The course deals with the design, capacity and intersection, also covers the different methods of traffic signal design.

Traffic Engineering: GATE (CE)

I am an civil engineering student .I completed upto 8th sem. with distinction and I'm top ranker in my civil  department ,GECM


Yash Parmar

In this course, the educator is discussing the different material used to making the highway and it's property and test.which is most important topic of highway transportation engineering for GATE

(Hindi) GATE: Highway Material

YouTube channel = (trickshot - let's trick it)
RPSC AEN 2018(pre+mains) Qualified
SSC JE 2018 (pre+mains) qualified

Rishikant Bairwa

This course covers all the important topics of Highway engineering as per the gate syllabus. There are all formulas and definitions which are conceptually described so that it could be easier for you to understand them. Must watch if preparing for GATE.

Lessons

11 lessons • 2h 14m